Scope: This method statement applies to installation of chilled water pumps and associated valve package. Purpose: Purpose of this method statement is to outline the method of storage, handling and installation of chilled water pumps and valve package. Materials Pump and motor assembled on a common base frame, coupled using suitable coupling arrangement by the… Read More: Chilled Water Pumps Installation Method Statement »
This method of statement specifies the detailed requirements and procedures for the grease trap installation for the building or any kind of project. Strictly follow the manufacturers Health & Safety recommendations for handling and use of the grease trap units and accessory materials. Site team shall ensure that all the operatives are aware of the… Read More: Grease Trap Installation Procedure »
This page provides detailed method statement for storm drainage water piping network installation including excavation, pipe laying, testing, backfilling, manhole construction and inspection procedures. The purpose of this method statement is to define the procedure for the preparation and construction of gravity line storm water in accordance with the requirements specified in the relevant specifications,… Read More: Storm Drainage Water Piping Network Method Statement »
1. Purpose The purpose of this method statement is to define the procedure for safe cutting, demolition, modification, and recasting of reinforced concrete strap beams in accordance with approved structural drawings, consultant instructions, project specifications, and applicable construction standards. This procedure ensures that all structural alteration works are executed safely without affecting the integrity and… Read More: Method Statement for Cutting and Recasting of Strap Beam »
Below document describes instructions and guidelines for PDA Testing On Bored Piles / Micro Piles. The PDA/CAPWAP system was developed by Pile Dynamics Inc, Ohio, USA and has been in use for more than 15 years. PDA field data acquisition and computer unit has its own in-built self checking system and all force and acceleration… Read More: PDA Test Procedure / PDA Testing On Bored Pile /… »
This electrical method statement covers the nature and type of work for the Earthing & Lightning Protection System installation as per site requirements for the project. The piles and vertical re-bars are provided with connections for Earthing & Lightning Protection System installation by main contractor. Any core drilling, chipping, excavation and back filling work required… Read More: Method Statement for Installation of Earthing & Lightning Protection System »
This method of statement specifies the sequences and methodology for the installation of MEP system for Water Treatment Plant. All workers associated with the installation of MEP for Water treatment plant will be responsible in accordance with the contract requirements and project specifications. All workers shall wear PPE as per risk assessment and project HSE… Read More: Sequences and Methodology for Installation of MEP System for Water… »
This standard document describes the permit to work system to control potentially high risk hot work operations through the issue of a Hot Work Permit. By implementing this safe work instruction organization shall ensure a safe place to work when undertaking hot works on any type and size of project. Additional control measures may be… Read More: Hot Work Permit System HSE Management Procedure – PTW Permit… »